There is a lot of rain in spring and summer, and the car wipers will be used frequently, but in the process of use, some problems will inevitably occur, which is also reasonable. However, if there is a problem with the windscreen wiper blade, it needs to be repaired in time to avoid affecting driving in rainy days.

Today, we will explain to you how to solve the problem of the front wiper blade on one side but the wiper on the other side, and the intermittent failure of the wiper. I believe that every car lover should also pay attention to this topic. We've collected some information on how to troubleshoot intermittent wiper failures, and we hope this helps.

The wiper blade is driven by the motor to drive the two wiper arms to work. If the wiper on one side works but the wiper on the other side does not move, it may be caused by the dislocation or damage of the transmission link. Since many wiper linkage ball heads are made of plastic, it is easy to crack and fall off after using for a long time. A simple and rough repair method is to turn the hole from the back of the ball head, drill through the ball bowl, and then directly use the nut Tighten, and rub with some butter when filling. If the drive link is broken, replace it.

Another possibility is that the motor is damaged or the gear is rusted. If the motor is damaged, it needs to be replaced with a new one. If the gear is rusted, it can be disassembled and cleaned, and then add a little lubricating oil to solve the problem. For the failure of the wiper, we need to prescribe the right medicine according to the different degrees of the failure. In order to avoid the failure of the wiper to scrape as much as possible, the usual inspection and maintenance work is particularly important. The wiper strip is made of rubber, which is easy to age and needs to be replaced regularly, usually once a year, so as to ensure the brushing effect.