-
Do you know what is the function of rear wiper blade?
Aug 13 , 2021
Many people know that the position of the front windshield has a wiper, used to scrape the rain and clean the windshield. But in fact, there is also a wiper on the rear windshield, but because the location is remote, it is easy to be forgotten. Compared with the clean and bright front windshield, the rear windshield and the wiper above the wiper, most are dirty and even accumulated dust. The appea...
Read More
-
Is the vibration of the wiper blade related to the wiper arm? How to do?
Aug 17 , 2021
Strictly speaking, the shaking phenomenon of the windscreen wiper has nothing to do with the wiper arm. The main reason is the deformation or aging of the rubber refill, which causes the surface of the wiper blade to be uneven. When the wiper blade is working on the windshield surface, there will be jitter or abnormal noise. How to solve this problem? 1.Check and clean the wiper blade or whether t...
Read More
-
Conventional intermittent wipers and sensor automatic wipers, do you know the difference?
Jan 26 , 2022
Divided from the working method of the wiper, the wiper is divided into two types, one is the traditional intermittent type, and the other is the induction automatic wiper. The traditional intermittent wipers is adjusted by the driver according to the rain and the line of sight. The difference with the wipers installed on other ordinary cars is that it can automatically raise and ...
Read More
-
Why is there an abnormal noise after replacing the new wipers?
Feb 25 , 2022
When the wipers is exposed to the air for a long time, it is inevitable that the wiper blade rubber refills will be aged and the firmware will be worn out, which will cause the friction between the wiper and the glass to cause abnormal noise. However, there is still abnormal noise after replacing the new wiper, what is the reason? Many car owners go to the auto repair shop to clean the whole car (...
Read More
-
How to deal with the car wiper blade without spraying water?
Apr 21 , 2022
Make sure whether there is a problem on one side or both sides. If there is a problem on only one side, it is usually caused by the blockage of the water nozzle on the wrong side. The solution is: poke it with a sewing needle, a pin or a very thin steel wire; First, spray out the remaining glass water, and then blow air at the blocked nozzle with an air gun. If there is a problem with the water sp...
Read More